Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
1Az-Fe Engine Control System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Camshaft Position Sensor -- Installation |
| 1. INSTALL CAMSHAFT POSITION SENSOR |
 |
- NOTICE:
- Make sure that the O-ring is not cracked or jammed when installing.
Apply a light coat of engine oil to the O-ring of the sensor.
Install the sensor with the bolt.
- Torque:
- 9.0 N*m{90 kgf*cm, 80 in.*lbf}
 |
Connect the sensor connector.
| 2. INSTALL AIR CLEANER CAP |
Install the air cleaner filter element onto the air cleaner case.
Insert the hinge part of the air cleaner cap into the air cleaner case, then hang the 2 hook clamps.
 |
Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.
- NOTICE:
- Make sure that the hose clamp is at the correct angle.
 |
Connect the purge line hose to the clamp.
 |
Connect the No. 2 ventilation hose to the air cleaner hose.
Connect the 4 wire harness clamps.
 |
Connect the mass air flow meter connector.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. CHECK FOR ENGINE OIL LEAKS |
Start the engine, and check that there are no oil leaks.
| 5. INSTALL NO. 1 ENGINE COVER |
Install the cover with the 2 nuts.
- Torque:
- 7.0 N*m{71 kgf*cm, 62 in.*lbf}
 |