REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)
REMOVE LUGGAGE ELECTRICAL KEY SWITCH (w/ Entry and Start System)
Back Door Outside Garnish (W/ Tire Carrier) -- Disassembly |
| 1. REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System) |
 |
Disconnect the connector and remove the license plate light cord.
| 2. REMOVE REAR LICENSE LIGHT COVER |
 |
Remove the 5 screws and rear license light cover.
| 3. REMOVE LUGGAGE ELECTRICAL KEY SWITCH (w/ Entry and Start System) |
Remove the 2 screws.
 |
Detach the 2 guides and remove the back door electrical key switch.
| 4. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
 |
Remove the 4 screws and license plate light.
| 5. REMOVE BACK DOOR ORNAMENT |
 |
Put protective tape around the back door ornament.
Using a moulding remover, detach the 6 claws and remove the back door ornament.
- NOTICE:
- Tape the moulding remover tip before use.
Text in Illustration *1 Protective Tape
| 6. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR |
for Rear Lower License Plate Bracket Stay:
Remove the back door outside garnish protector.
 |
for Rear License Light Cover:
Remove the back door outside garnish protector.
 |