Roof Drip Side Finish Moulding Removal


  1. REMOVE ROOF RACK ASSEMBLY LH (w/ Roof Rack)

  2. REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER LH (w/o Roof Rack)

  3. REMOVE ROOF DRIP SIDE FINISH MOULDING LH

  4. REMOVE CENTER NO. 2 ROOF DRIP SIDE FINISH MOULDING LH

  5. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH

  6. REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH

Roof Drip Side Finish Moulding -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE ROOF RACK ASSEMBLY LH (w/ Roof Rack)

  1. Remove the roof rack (LandCruiser RM000003CIE00IX.html).



2. REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER LH (w/o Roof Rack)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Roof Drip Side Finish Moulding Removal
HINT:
Use the same procedure to remove the roof drip side finish moulding joint cover on the other side.

  1. Put protective tape around the roof drip side finish moulding joint cover.

  1. Detach the 2 claws and remove the roof drip side finish moulding joint cover.

    Text in Illustration
    *1
    		Protective Tape


3. REMOVE ROOF DRIP SIDE FINISH MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Roof Drip Side Finish Moulding Removal

  1. Put protective tape around the roof drip side finish moulding.

  1. Detach the clip and remove the roof drip side finish moulding.

    NOTICE:
    1. When removing the rear roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clip.
    2. If the roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.
    Text in Illustration
    *1
    		Protective Tape


4. REMOVE CENTER NO. 2 ROOF DRIP SIDE FINISH MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Roof Drip Side Finish Moulding Removal

  1. Put protective tape around the center No. 2 roof drip side finish moulding.

  1. Remove the center No. 2 roof drip side finish moulding.

    Text in Illustration
    *1
    		Protective Tape


5. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Roof Drip Side Finish Moulding Removal

  1. Put protective tape around the center roof drip side finish moulding.

  1. Remove the center roof drip side finish moulding.

    Text in Illustration
    *1
    		Protective Tape


6. REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Exterior Panels Trim.Front Bumper.Roof Drip Side Finish Moulding Removal

  1. Put protective tape around the rear roof drip side finish moulding.

  1. Detach the clip and remove the rear roof drip side finish moulding.

    NOTICE:
    1. When removing the rear roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clip.
    2. If the roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.
    Text in Illustration
    *1
    		Protective Tape