Height Control Sensor Inspection


  1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

Height Control Sensor -- Inspection



1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY



Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Ext).Lighting System.Height Control Sensor Inspection


Text in Illustration
*a
Component without harness connected
(Rear Height Control Sensor)
*b
Min. Low
*c
Normal
*d
Max. High
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
45°
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
45°

  1. Connect 3 dry batteries of 1.5 V in series.

  1. Connect the positive (+) end of the batteries to terminal 1 (SHB) of the height control sensor and the negative (-) end of the batteries to terminal 3 (SHG). While slowly moving the sensor link up and down, measure the voltage between terminal 2 (SHRR) and terminal 3 (SHG).

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Condition
    		Specified Condition
    2 (SHRR) - 3 (SHG)
    		Max. high (45°)
    		4.4 to 4.6 V
    Normal (0°)
    		2.3 to 2.6 V
    Min. low (-45°)
    		0.4 to 0.6 V
    NOTICE:
    Do not apply a voltage of 5 V or higher.
    If the result is not as specified, replace the rear height control sensor sub-assembly.