INSTALL SUPPLY PUMP ASSEMBLY

INSTALL FUEL INLET PIPE SUB-ASSEMBLY

INSTALL FUEL TUBE SUB-ASSEMBLY

INSTALL NO. 3 FUEL HOSE

INSTALL NO. 1 INTAKE MANIFOLD INSULATOR

INSTALL WIRING HARNESS CLAMP BRACKET

INSTALL NO. 5 FUEL HOSE

INSTALL NO. 1 FUEL PIPE

INSTALL ENGINE ASSEMBLY

Install a new O-ring to the supply pump assembly.

Install the supply pump drive coupling.

• HINT:

• Line up the coupling with the groove in the camshaft end.

Install the supply pump assembly with the 2 bolts.

• Torque:
• 21 N*m{ 210 kgf*cm, 15 ft.*lbf}

• NOTICE:

• Apply engine oil to the O-ring on the supply pump assembly.

Install the No. 1 injection pump protector with the 3 bolts.

• Torque:
• 20 N*m{ 204 kgf*cm, 15 ft.*lbf}

Connect the suction control valve connector.

Temporarily install the fuel inlet pipe with the 2 clamps and nut.

Using the SST, first tighten the nut at the common rail end of the fuel inlet pipe.

• SST
• 09023-38401

• Torque:
• 27 N*m{ 275 kgf*cm, 20 ft.*lbf}

• HINT:

Using the SST, tighten the nut at the supply pump end of the fuel inlet pipe.

• SST
• 09023-38401

• Torque:
• 27 N*m{ 275 kgf*cm, 20 ft.*lbf}

• HINT:

Tighten the fuel inlet pipe clamp nut.

• Torque:
• 5.0 N*m{ 51 kgf*cm, 44 in.*lbf}

Install the fuel tube and gasket with the union bolt.

• Torque:
• 23 N*m{ 235 kgf*cm, 17 ft.*lbf}

Turn the retainer in the direction indicated by the arrow until it stops.

Insert the fuel tube connector into the injector.

Turn the retainer in the direction indicated by the arrow until it makes a "click" sound.

• NOTICE:

• If the fuel tube connector is not inserted into the correct position on the injector, the retainer will not turn beyond the point indicated in the illustration.

Connect the exhaust fuel addition injector connector.

Using pliers, slide the 2 clips to install the No. 3 fuel hose as shown in the illustration.

Using pliers, slide the clip to install the No. 5 fuel hose.