Relay (W/ Rear Wiper) On-Vehicle Inspection


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE WASHER RR RELAY

  3. INSPECT WASHER RR RELAY

  4. INSTALL WASHER RR RELAY

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Relay (W/ Rear Wiper) -- On-Vehicle Inspection



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE WASHER RR RELAY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Relay (W/ Rear Wiper) On-Vehicle Inspection

  1. Remove the washer RR relay from the engine room relay block.

    Text in Illustration
    *1
    		Washer RR Relay


3. INSPECT WASHER RR RELAY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Relay (W/ Rear Wiper) On-Vehicle Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    3 - 5
    		Battery voltage not applied between terminals 1 and 2
    		10 kΩ or higher
    Battery voltage applied to terminals 1 and 2
    		Below 1 Ω
    1. If the result is not as specified, replace the washer RR relay.


4. INSTALL WASHER RR RELAY

  1. Install the washer RR relay to the engine room relay block.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).