Headlight Cleaner Actuator -- Removal |
| 1. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 13 clips and upper radiator support seal.
| 2. REMOVE RADIATOR GRILLE |
 |
Put protective tape around the radiator grille.
Remove the 4 screws.
Detach the 8 claws and remove the radiator grille.
Text in Illustration *1 Protective Tape
| 3. REMOVE FRONT BUMPER COVER |
Remove the 2 screws.
- HINT:
- Use the same procedure for the screws on the other side.
 |
Remove the 2 screws.
Text in Illustration *1 Screw *2 Bolt A *3 Bolt B
 |
Remove the 2 bolts labeled A and 2 bolts labeled B.
Put protective tape around the front bumper cover.
Text in Illustration *1 Protective Tape
 |
Remove the 4 clips.
Detach the 16 claws and remove the front bumper cover.
- NOTICE:
- Do not hold the middle of the front bumper cover, as it may become reformed.
w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:
Disconnect the 3 connectors.
w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:
Disconnect the connector.
w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:
Disconnect the 2 connectors.
w/ Headlight Cleaner System:
Disconnect the No. 1 headlight cleaner hose.
| 4. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH |
Extend the type 1 headlight washer nozzle sub-assembly LH by hand.
- NOTICE:
- Be careful not to damage the headlight washer actuator sub-assembly or type 1 headlight washer nozzle sub-assembly LH.
 |
Detach the claw and remove the type 1 headlight washer nozzle sub-assembly LH.
| 5. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 6. REMOVE NO. 1 HEADLIGHT CLEANER HOSE |
Disconnect the No. 1 headlight cleaner hose from the headlight washer actuator sub-assembly.
 |
Detach the 5 clamps and remove the No. 1 headlight cleaner hose from the front bumper cover.
| 7. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
Remove the headlight cleaner clamp as shown in the illustration.
Text in Illustration *1 Headlight Cleaner Clamp
 |
Pull down the headlight cleaner clamp B and remove it.
Text in Illustration *1 Headlight Cleaner Clamp B
 |
Push the tab shown by arrow 1, detach the 2 claws and remove the headlight washer actuator sub-assembly LH as shown in the illustration.
| 8. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH |
Remove the headlight cleaner clamp as shown in the illustration.
Text in Illustration *1 Headlight Cleaner Clamp
 |
Pull down the headlight cleaner clamp A and remove it.
Text in Illustration *1 Headlight Cleaner Clamp A
 |
Push the tab shown by arrow 1, detach the 2 claws and remove the headlight washer actuator sub-assembly RH as shown in the illustration.
