Wiper And Washer System Headlight Signal Circuit
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK HEADLIGHT CLEANER CONTROL RELAY (HDLO VOLTAGE)
WIPER AND WASHER SYSTEM - Headlight Signal Circuit |
DESCRIPTION
The headlight cleaner control relay detects the low beam headlights status.
WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- First check that the low beam headlights operate normally.
| 1.CHECK HEADLIGHT CLEANER CONTROL RELAY (HDLO VOLTAGE) |
Disconnect the A38 headlight cleaner control relay connector.
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
| Switch Condition
| Specified Condition
|
A38-1 (HDLO) - Body ground
| Headlight dimmer switch in head
| 11 to 14 V
|
A38-1 (HDLO) - Body ground
| Headlight dimmer switch not in head
| Below 1 V
|
Text in Illustration*a
| Front view of wire harness connector
(to Headlight Cleaner Control Relay)
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
