Window Defogger Wire -- Repair |
1. REPAIR DEFOGGER WIRE |
![]() |
Clean the broken wire tips with grease, wax and silicone remover.
Place masking tape along both sides of the wire.
Thoroughly mix the repair agent.
Text in Illustration *a Repair Point *b Masking Tape *c Broken Wire
Using a fine tip brush, apply a small amount of the agent to the wire.
Text in Illustration *a Fine Tip Brush *b Repair Point
![]() |
After a few minutes, remove the masking tape.
- NOTICE:
- Do not allow electricity to flow in the defogger wire for at least 24 hours.