Power Window Control System -- Operation Check |
- *: for 5 Door
CHECK WINDOW LOCK SWITCH |
![]() |
Turn the ignition switch to ON.
Press the window lock switch of the multiplex network master switch assembly.
- HINT:
- The illumination (LED) built into the switch knob of each seat does not turn off.
Check that the power window for each seat except the driver seat can no longer be operated.
Check that the power window for each seat cannot be operated from the driver seat.
Press the window lock switch of the multiplex network master switch assembly again.
Check that the power window for each seat except the driver seat can be operated.
Check that the power window for each seat can be operated from the driver seat.
CHECK MANUAL UP / DOWN FUNCTION |
Check that the driver door power window operates as follows:
OK Condition Master Switch Switch Operation Power Window Ignition switch ON Driver door Pulled halfway up UP (Closes) Pushed halfway down DOWN (Opens) Check that the front passenger door window and rear power windows* operate as follows:
OK Condition Regulator Switch Switch Operation Power Window - Ignition switch ON
- Window lock switch off
Front passenger door Pulled halfway up UP (Closes) Pushed halfway down DOWN (Opens) Rear LH door* Pulled halfway up UP (Closes) Pushed halfway down DOWN (Opens) Rear RH door* Pulled halfway up UP (Closes) Pushed halfway down DOWN (Opens) - Ignition switch ON
CHECK AUTO UP / DOWN FUNCTION |
Check that the driver door power window operates as follows:
OK Condition Master Switch Switch Operation Power Window Ignition switch ON Driver door Pulled up (One touch operation) AUTO UP (Closes) Pushed down (One touch operation) AUTO DOWN (Opens) Check that the front passenger door window and rear power windows* operate as follows:
OK Condition Regulator Switch Switch Operation Power Window - Ignition switch ON
- Window lock switch off
Front passenger door Pulled up (One touch operation) AUTO UP (Closes) Pushed down (One touch operation) AUTO DOWN (Opens) Rear LH door* Pulled up (One touch operation) AUTO UP (Closes) Pushed down (One touch operation) AUTO DOWN (Opens) Rear RH door* Pulled up (One touch operation) AUTO UP (Closes) Pushed down (One touch operation) AUTO DOWN (Opens) - Ignition switch ON
CHECK REMOTE MANUAL UP / DOWN FUNCTION |
Check that the front passenger door window and rear power windows* operate as follows:
OK Condition Master Switch Switch Operation Power Window Ignition switch ON Front passenger door Pulled halfway up UP (Closes) Pushed halfway down DOWN (Opens) Rear LH door* Pulled halfway up UP (Closes) Pushed halfway down DOWN (Opens) Rear RH door* Pulled halfway up UP (Closes) Pushed halfway down DOWN (Opens)
CHECK REMOTE AUTO UP / DOWN FUNCTION |
Check that the front passenger door window and rear power windows* operate as follows:
OK Condition Master Switch Switch Operation Power Window Ignition switch ON Front passenger door Pulled up (One touch operation) AUTO UP (Closes) Pushed down (One touch operation) AUTO DOWN (Opens) Rear LH door* Pulled up (One touch operation) AUTO UP (Closes) Pushed down (One touch operation) AUTO DOWN (Opens) Rear RH door* Pulled up (One touch operation) AUTO UP (Closes) Pushed down (One touch operation) AUTO DOWN (Opens)
CHECK KEY-OFF OPERATION FUNCTION |
Check that each power window can be operated with the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assembly* after the ignition switch is turned off.
- HINT:
- If the window lock switch is on, the power windows cannot be operated by using the power window regulator switch assembly and rear power window regulator switch assembly*. Therefore, turn the window lock switch off before checking the window operation.
Check that the key-off operation function does not operate immediately after the driver door or front passenger door is opened.
- HINT:
- Even if the driver door or passenger door is opened during automatic window operation while the key-off operation function is on, the window will continue operating.
Check that all the power windows cannot be operated after more than approximately 43 seconds have elapsed since the ignition switch is turned off.
CHECK KEY-LINKED FUNCTION |
- NOTICE:
- This inspection is possible only when the key-linked open and close function is set to ON through the customize function using the intelligent tester (the default setting is OFF).
Check that all power windows operate as follows:
OK Condition Door Key Cylinder Operation Power Window No key is inside vehicle and all doors are closed Held in lock position for more than 2 seconds Up (Closes) No key is inside vehicle and all doors are closed Returned to neutral position Stop No key is inside vehicle and all doors are closed Held in unlock position for more than 2 seconds Down (Opens) No key is inside vehicle and all doors are closed Returned to neutral position Stop
CHECK WIRELESS TRANSMITTER-LINKED OPEN AND CLOSE FUNCTION |
- NOTICE:
- This inspection is possible only when the wireless transmitter-linked open and close function is set to ON through the customize function using the intelligent tester (the default setting is OFF).
Check that all power windows operate as follows when operating the transmitter:
OK Condition Transmitter Operation Power Window No key is inside vehicle, and all doors are closed and locked UNLOCK switch pressed for more than 3.0 seconds Down (Opens) No key is inside vehicle, and all doors are closed and locked UNLOCK switch released Stops No key is inside vehicle, and all doors are closed and locked LOCK switch pressed for more than 3.0 seconds Up (Closes) No key is inside vehicle, and all doors are closed and locked LOCK switch released Stops
CHECK JAM PROTECTION FUNCTION |
Check the basic function.
- CAUTION:
- Do not put your fingers between the door frame and door glass to check the jam protection function. Also, prevent any part of your body from being caught during inspection.
- HINT:
- The jam protection function is operative during both the auto up and manual up operations while the engine is running or the ignition switch is ON, and also for approximately 43 seconds after the ignition switch is turned off.
Fully open the door window.
Set a check jig wrapped with a piece of cloth near the window fully closed position.
Text in Illustration *a Thick Book *b Cloth When an auto up or manual up operation is performed to fully close the door glass, check that the glass stops momentarily when it contacts the end of the hammer, lowers via a down operation and then stops.
- HINT:
- If a manual up operation is performed from the seat, the door glass will lower approximately 25 mm (0.9843 in.) from the point it contacts the end of the hammer or continue lowering for approximately 5 seconds and then stop.
- If a manual up operation is not performed from the seat, the door glass will lower approximately 155 mm (6.1024 in.) from the point it contacts the end of the hammer or continue lowering for approximately 5 seconds and then stop.
- After the jam protection function operates when an auto up or manual up operation is performed, the jam protection function will not operate when the manual up operation is performed again within approximately 4 seconds.
- After the catch protection function operates when an auto down or manual down operation is performed, the jam protection function will not operate when the manual up operation is performed again within approximately 4 seconds.
While the door glass is lowering, check that the switch of that door or the remote operation using the multiplex network master switch assembly cannot be used to raise the door glass.
CHECK CATCH PROTECTION FUNCTION |
Check the basic operation.
- HINT:
- The catch protection function operates when the ignition switch is ON, and when auto down and manual down are operated after the ignition switch is turned off.
Fully close all door windows.
While using auto down or manual down to open the window, grasp the upper edge of the door glass with one or two hands and check that the door glass operation stops.
- HINT:
- After the catch protection function operates when an auto down or manual down operation is performed, the catch protection function will not operate when the manual down operation is performed again within approximately 4 seconds.
![]() |
CHECK POWER WINDOW REGULATOR SWITCH LED ILLUMINATION |
When the ignition switch is turned from off to ON with the connectors connected, check that the illumination (LED) on the switch portion of the power window regulator switch assembly turns on.