Room Temperature Sensor (For Front Side) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

  3. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

  6. REMOVE COMBINATION METER ASSEMBLY

  7. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

Room Temperature Sensor (For Front Side) -- Removal


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Room Temperature Sensor (For Front Side) Removal

  1. Put protective tape around the instrument cluster finish panel ornament.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 3 clips and remove the instrument cluster finish panel ornament.



3. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 clips.

  1. Disconnect each connector and remove the instrument panel finish plate garnish.



4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 clips.

  1. Disconnect each connector and remove the instrument panel finish panel.



5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 claws, 2 clips and 2 guides and remove the instrument cluster finish panel.



6. REMOVE COMBINATION METER ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 4 screws and combination meter assembly.

  1. Disconnect the 2 connectors.



7. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector and hose.

  1. Detach the 2 claws and remove the cooler thermistor.