Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Installation


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

  2. INSTALL REAR SEAT CUSHION MOULDING RH

  3. INSTALL REAR SEAT ASSEMBLY RH

Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) -- Installation


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (LandCruiser RM00000118W0G8X.html).


1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Installation

  1. Install the inner belt with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}
    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.
    Text in Illustration
    *a
    		Protruding Part


2. INSTALL REAR SEAT CUSHION MOULDING RH

  1. Attach the 2 guides and 3 claws to install the rear seat rear cushion moulding LH.

  1. Install the screw.



3. INSTALL REAR SEAT ASSEMBLY RH

  1. Install the rear seat assembly RH (LandCruiser RM00000468D00QX.html).