Lexus IS250 IS220d GSE20 ALE20 4GR-FSE ENGINE CONTROL SYSTEM
VVT SENSOR - INSTALLATION
| 1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2) |
Install the sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the sensor connector.
| 2. INSTALL VVT SENSOR (for Intake Side of Bank 2) |
Install the sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the sensor connector.
| 3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1) |
Install the sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the sensor connector.
| 4. INSTALL VVT SENSOR (for Intake Side of Bank 1) |
Install the sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the sensor connector.
| 5. INSTALL V-BANK COVER SUB-ASSEMBLY |
Engage the 2 clips on the front of the cover, and then engage the clip on the rear to install the V-bank cover.
- NOTICE:
Be sure to engage the clips securely.
Do not apply excessive force or do not hit the cover to engage the clips. This may cause the cover to break.
LEXUS IS250, IS220d / GSE20 ALE20