Front Seat Cushion Heater (For Power Seat) -- Removal |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE FRONT SEAT ASSEMBLY |
Remove the front seat assembly (LandCruiser RM00000467200XX.html).
| 2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
 |
Using a moulding remover, detach the 2 claws and remove the slide and vertical power seat switch knob.
| 3. REMOVE RECLINING POWER SEAT SWITCH KNOB |
 |
Using a moulding remover, detach the 2 claws and remove the reclining power seat switch knob.
| 4. REMOVE FRONT SEAT CUSHION SHIELD LH |
Disconnect the lifter motor connector.
Remove the screw of the front seat No. 1 inner cushion shield LH and detach the guide.
Detach the clip of the front seat No. 1 inner cushion shield LH.
Using a moulding remover, detach the 3 claws and guide.
Move the front seat cushion shield LH in the direction of the arrow to detach the clip and remove the front seat No. 1 inner cushion shield LH together with the front seat cushion shield LH as a unit.
Detach the 3 claws and open the wire harness cover.
 |
Detach the 3 wire harness clamps and disconnect the seat wire connector.
| 5. REMOVE FRONT POWER SEAT SWITCH LH |
Remove the 3 screws.
w/ Seat Memory System:
Disconnect the 2 power seat switch connectors and remove the front power seat switch LH.
 |
w/o Seat Memory System:
Disconnect the power seat switch connector and remove the front power seat switch LH.
 |
| 6. REMOVE LUMBAR SWITCH ASSEMBLY (for Driver Side) |
 |
Using a screwdriver, detach the 2 claws.
Disconnect the lumbar switch connector and remove the lumbar switch.
| 7. REMOVE FRONT SEAT INNER CUSHION SHIELD LH |
 |
Using a moulding remover, detach the 3 claws and remove the front seat inner cushion shield LH.
| 8. REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side) |
 |
Using a moulding remover, detach the 4 claws and remove the front seat inner cushion shield RH.
| 9. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH |
for Driver Side:
(LandCruiser RM000003RQO025X_01_0006.html)
for Front Passenger Side:
(LandCruiser RM000003RQO025X_01_0001.html)
| 10. REMOVE SEAT CUSHION COVER WITH PAD |
Remove the rubber band from the seat cushion spring.
 |
Disconnect the seat heater connector and detach the wire harness clamp.
 |
w/ Front Seat Side Airbag:
Detach the fastening tape and open the cover.
Text in Illustration *1 Fastening Tape Disconnect the airbag wire harness.
 |
Detach the 2 hooks.
 |
Disconnect the seat heater connector and detach the 3 wire harness clamps.
 |
Detach the hooks.
for Front Passenger Side:
Detach the claw and disconnect the connector.
 |
Remove the seat cushion cover with pad.
| 11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
Type A:
Remove the hog rings and disconnect the straps.
 |
Type B:
Cut off the tack pins and disconnect the straps.
Text in Illustration *1 Tack Pin
 |
Remove the 15 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.
 |
| 12. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH |
 |
Cut off the tack pins and remove the front seat cushion heater from the front seat cushion cover.
Text in Illustration *1 Tack Pin