Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) Installation
INSTALL REAR SEAT ASSEMBLY LH
INSTALL SEAT TRACK COVER LH
INSTALL SEAT TRACK INNER BRACKET COVER LH
INSTALL REAR SEAT OUTER TRACK BRACKET COVER
INSTALL REAR SEAT TRACK INNER BRACKET COVER
INSTALL REAR SEAT HEADREST ASSEMBLY
Rear No. 1 Seat Assembly (For 60/40 Split Slide Walk-In Seat Type Lh Side) -- Installation |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. INSTALL REAR SEAT ASSEMBLY LH |
Place the rear seat assembly LH in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
- HINT:
- Be sure to install the seat with the seatback folded down.
Connect the center inner belt to the rear seat assembly.
Temporarily install the seat with the 5 bolts and nut.
Tighten the bolts and nut in the order indicated in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
w/ Seat Heater System:
Connect the seat heater connector.
| 2. INSTALL SEAT TRACK COVER LH |
Attach the 3 clips to install the seat track cover LH.
| 3. INSTALL SEAT TRACK INNER BRACKET COVER LH |
Attach the 6 clips to install the seat track inner bracket cover LH.
| 4. INSTALL REAR SEAT OUTER TRACK BRACKET COVER |
Move the cover in the direction of the arrow to attach the 2 guides.
Attach the 2 claws to install the rear seat outer track bracket cover.
| 5. INSTALL REAR SEAT TRACK INNER BRACKET COVER |
Attach the 2 claws and guide to install the rear seat track inner bracket cover.
| 6. INSTALL REAR SEAT HEADREST ASSEMBLY |
Install the rear seat headrest assembly.
