Front Seat Assembly (For Walk In Seat Type) Disassembly


  1. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

  2. REMOVE FRONT SEAT CUSHION SHIELD RH

  3. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

  4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

  5. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

  6. REMOVE CAP

  7. REMOVE SEAT CUSHION COVER WITH PAD

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

  9. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/ Seat Heater System)

  10. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH

  11. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH

  12. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)

  13. REMOVE FRONT SEAT WIRE RH

  14. REMOVE RECLINING ADJUSTER INSIDE COVER LH

  15. REMOVE RECLINING ADJUSTER INSIDE COVER RH

  16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

  17. REMOVE FRONT SEATBACK HEATER ASSEMBLY RH (w/ Seat Heater System)

  18. REMOVE SEPARATE TYPE FRONT SEATBACK PAD

  19. REMOVE FRONT SEAT CUSHION COVER RH

  20. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

  21. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

Front Seat Assembly (For Walk In Seat Type) -- Disassembly


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the RH side.


1. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly

  1. Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the handle.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


2. REMOVE FRONT SEAT CUSHION SHIELD RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw.

  1. Using a moulding remover, detach the 5 claws and 2 clips.

  1. Detach the cable clamp and remove the cushion shield.



3. REMOVE FRONT SEAT INNER CUSHION SHIELD RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 5 claws and remove the cushion shield.



4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

  1. for Manual Seat, Power Seat 4 Way Seat Type:
    Disconnect the 2 connectors and detach the 3 clamps.

  1. for Power Seat 8 Way Seat Type:
    Disconnect the 2 connectors and detach the 6 clamps.

  1. Remove the nut and front seat inner belt assembly RH.

  1. Remove the front seat belt anchor plate.



5. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the rubber band from the seat cushion spring.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:
    Disconnect the seat heater connector and detach the wire harness clamp.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly

  1. w/ Front Seat Side Airbag:

    1. Detach the claw and disconnect the airbag connector.

    2. Detach the 4 airbag wire harness clamps.

    3. Detach the fastening tape and open the cover.

      Text in Illustration
      *1
      		Fastening Tape

    4. Disconnect the airbag wire harness.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the hook.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the cable clamp and disconnect the cable from the seatback.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 4 bolts and seatback assembly.



6. REMOVE CAP


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 caps.



7. REMOVE SEAT CUSHION COVER WITH PAD


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a clip remover, remove the clip.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Seat Heater System:
    Disconnect the seat heater connector and detach the 3 wire harness clamps.

  1. Detach the hooks.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the claw and disconnect the connector.

  1. Remove the seat cushion cover with pad.



8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the hog rings and seat cushion cover from the seat cushion pad.



9. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/ Seat Heater System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly

  1. Cut off the tack pins and remove the front seat cushion heater from the front seat cushion cover.

    Text in Illustration
    *1
    		Tack Pin


10. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly

  1. Remove the screw.

  1. Move the protector in the direction of the arrow to detach the hook and 2 guides and remove the protector.

    Text in Illustration
    *1
    		Hook
    *2
    		Guide


11. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly

  1. Remove the screw.

  1. Using a clip remover, detach the clip.

  1. Move the protector in the direction of the arrow to detach the hook and guide and remove the protector.

    Text in Illustration
    *1
    		Hook
    *2
    		Guide


12. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY RH (w/ Seat Heater System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Detach the 2 clamps and remove the seat heater control.



13. REMOVE FRONT SEAT WIRE RH

  1. Remove the seat wire.



14. REMOVE RECLINING ADJUSTER INSIDE COVER LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the guide.

  1. Move the cover in the direction of the arrow to remove it.



15. REMOVE RECLINING ADJUSTER INSIDE COVER RH
HINT:
Use the same procedure described for the LH side.


16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 hog rings.



  1. Open the 2 fasteners, and then open the seatback cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly


    Text in Illustration
    *A
    		for Cloth Seat
    		*B
    		for Leather Seat


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ Front Seat Side Airbag:

    1. Remove the nut and seatback cover bracket from the seat frame.

    2. Disconnect the seatback cover bracket from the seatback pad.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the 4 claws and remove the 2 headrest supports.



  1. Remove the hog rings and seatback cover.

    HINT:
    The number of hog rings differs according to seat type.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly


    Text in Illustration
    *A
    		for Type A
    		*B
    		for Type B


17. REMOVE FRONT SEATBACK HEATER ASSEMBLY RH (w/ Seat Heater System)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat.Front Power Seat Control System (W/ Memory).Front Seat Assembly (For Walk In Seat Type) Disassembly

  1. Cut off the tack pins which fasten the seatback heater to the seatback cover, and then remove the seatback heater from the seatback cover.

    Text in Illustration
    *1
    		Tack Pin


18. REMOVE SEPARATE TYPE FRONT SEATBACK PAD

  1. Remove the seatback pad.



19. REMOVE FRONT SEAT CUSHION COVER RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw and cover.



20. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw and cushion shield.



21. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)
CAUTION:
When storing the front seat side airbag assembly, keep the airbag deployment side facing upward.
HINT:
Use the same procedure for the RH and LH sides.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 clamps.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 nuts and front seat side airbag assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.