Front Seat Assembly (For Power Seat) Removal


  1. PRECAUTION

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY

  3. REMOVE FRONT SEAT INNER TRACK BRACKET COVER LH

  4. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER LH

  5. REMOVE INNER SEAT TRACK BRACKET COVER LH

  6. REMOVE SEAT TRACK COVER LH

  7. REMOVE FRONT SEAT ASSEMBLY

Front Seat Assembly (For Power Seat) -- Removal


NOTICE:
  1. Wear protective gloves. Sharp areas on the parts may injure your hands.
  2. If the side airbag was deployed, replace the front seat side airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).


2. REMOVE FRONT SEAT HEADREST ASSEMBLY

  1. Remove the front seat headrest assembly.



3. REMOVE FRONT SEAT INNER TRACK BRACKET COVER LH

  1. Operate the power seat switch (slide switch) to move the seat to the rearmost position.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 2 claws.

  1. Move the front seat inner track bracket cover LH in the direction of the arrow to detach the 2 guides and remove the front seat inner track bracket cover LH.



4. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 2 claws.

  1. Move the front seat outer track bracket cover LH in the direction of the arrow to detach the 2 claws and guide and remove the front seat outer track bracket cover LH.



5. REMOVE INNER SEAT TRACK BRACKET COVER LH

  1. Operate the power seat switch (slide switch) to move the seat to the foremost position.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 2 claws.

  1. Move the inner seat track bracket cover LH in the direction of the arrow to detach the 2 guides and remove the inner seat track bracket cover LH.



6. REMOVE SEAT TRACK COVER LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 2 claws.

  1. Move the seat track cover LH in the direction of the arrow to detach the 4 guides and remove the seat track cover LH.



7. REMOVE FRONT SEAT ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Operate the power seat switch (slide switch) to move the seat to the rearmost position.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Operate the power seat switch (slide switch) to move the seat to the center position, and operate the power seat switch (reclining switch) to move the seatback to the upright position.

  1. Disconnect the cable from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the battery negative (-) terminal to disable the SRS system.
    NOTICE:
    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).

  1. Disconnect the connectors under the seat.

  1. Remove the front seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.