Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Turn the intelligent tester main switch on.

Select the menu items: Powertrain / Engine and ECT / Data List / Accel Position No. 1, Accel Position No. 2.

When depressing and releasing the accelerator pedal, check that the values of "Accel Position No. 1" and "Accel Position No. 2" are within the specification.

• Standard voltage:
• Accel Position No. 1:

• Accelerator Pedal	Specified Condition
  Released	0.5 to 1.1 V
  Depressed	2.6 to 4.5 V

• Accel Position No. 2:

• Accelerator Pedal	Specified Condition
  Released	1.2 to 2.0 V
  Depressed	3.4 to 5.0 V

If the result is not as specified, check the accelerator pedal, wire harness and ECM.

Using an ohmmeter, measure the resistance between each terminal.

• Resistance:
• RHD:

• Tester Connection	Specified Condition
  5 (VPA1) - 1 (EP1)	5.0 kΩ or less
  2 (VPA2) - 3 (EP2)	5.0 kΩ or less
  4 (VCP1) - 1 (EP1)	1.5 to 6.0 kΩ
  6 (VCP2) - 3 (EP2)	1.5 to 6.0 kΩ

• LHD:

• Tester Connection	Specified Condition
  5 (VPA1) - 3 (EP1)	5.0 kΩ or less
  2 (VPA2) - 1 (EP2)	5.0 kΩ or less
  6 (VCP1) - 3 (EP1)	1.5 to 6.0 kΩ
  4 (VCP2) - 1 (EP2)	1.5 to 6.0 kΩ