Generator Disassembly

Using a screwdriver, puncture the center of the generator pulley cap and pry it off.

NOTICE:

Do not reuse the generator pulley cap.

Mount the generator assembly in the vise between aluminum plates.

Install SST A and SST B to the generator pulley with clutch as shown in the illustration.

SST

09820-63021

NOTICE:

Securely attach SST to the generator pulley with clutch and generator rotor shaft.

Using a wrench to hold SST A and turn SST B counterclockwise to loosen the generator pulley with clutch.

Text in Illustration

*a	Hold
	Turn

NOTICE:

Be careful as the generator pulley with clutch or generator rotor shaft may be damaged if the position of SST is not securely maintained while performing this operation.

Remove SST from the generator assembly.

Remove the generator pulley with clutch from the generator rotor shaft.

Remove the generator assembly from the vise.

Place the generator assembly on the generator pulley with clutch.

Remove the 3 bolts and generator rear end cover from the generator coil assembly.

Remove the terminal insulator from the generator coil assembly.

Remove the 2 screws and generator brush holder assembly from the generator coil assembly.

Remove the 4 through bolts.

Using SST, remove the generator coil assembly.

SST

09950-40011(09951-04020,09952-04010,09953-04020,09954-04010,09955-04071,09957-04010,09958-04011)

Text in Illustration

*a	Hold
	Turn

Remove the generator bearing cover packing.

NOTICE:

If the generator bearing cover packing breaks, remove all broken pieces.

HINT:

The generator bearing cover packing may be installed on the generator rotor assembly.

Remove the generator rotor assembly from the generator drive end frame.

Check that the generator drive end frame bearing is not rough or worn and that it rotates smoothly. If necessary, replace the generator drive end frame bearing.

Remove the 4 screws and retainer plate from the generator drive end frame.

Using SST and a hammer, tap out the generator drive end frame bearing from the generator drive end frame.

SST

09950-60010(09951-00250)
09950-70010(09951-07100)