Navigation Antenna -- Installation |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY |
Install the navigation antenna assembly with the 2 screws.
 |
Attach the 2 clamps.
| 2. INSTALL DEFROSTER NOZZLE ASSEMBLY |
Install the defroster nozzle with the 4 screws <A>.
| 3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
- HINT:
- Use the same procedure described for the No. 1 side defroster nozzle duct.
| 4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
Attach the 2 claws to install the No. 1 side defroster nozzle duct.
Install the screw <A>.
| 5. INSTALL NO. 2 HEATER TO REGISTER DUCT |
- HINT:
- Use the same procedure described for the No. 1 heater to register duct.
| 6. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Install the No. 1 heater to register duct with the 4 screws <A>.
| 7. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).
| 9. CHECK SRS WARNING LIGHT |