Dtc B1585 Usb Device Malfunction
DESCRIPTION
INSPECTION PROCEDURE
REPLACE USB DEVICE OR “iPod”
CHECK FOR DTC
DTC B1585 USB Device Malfunction |
DESCRIPTION
This DTC is stored when a malfunction occurs in a connected device.DTC Code
| DTC Detection Condition
| Trouble Area
|
B1585
| USB Device Malfunction
- Non mass-storage class or incompatible protocol USB device
- USB device with an incompatible file system, corrupted or incompatible File Allocation Table (FAT)
- "iPod" malfunction
- "iPod" with unsupported firmware
- Unsupported "iPod" model
| - USB device or "iPod"
- Navigation receiver assembly
|
INSPECTION PROCEDURE
- HINT:
- When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1.REPLACE USB DEVICE OR “iPod” |
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the engine switch off.
- HINT:
- When this DTC has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
- HINT:
- If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
- Refer to System Description for compatible formats and versions (LandCruiser RM000005K8W00VX.html).
Clear the DTCs (LandCruiser RM0000011BU0W7X.html).
Check for DTCs (LandCruiser RM0000011BU0W7X.html).
- OK:
- No DTCs are output.
OK |
|
|
|
USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR USB
DEVICE OR "iPod" WAS DEFECTIVE |
|