Navigation System (For Radio And Display Type) Illumination For Panel Switch Does Not Come On With Tail Switch On


INSPECTION PROCEDURE

CHECK VEHICLE SIGNAL (OPERATION CHECK)

NAVIGATION SYSTEM (for Radio and Display Type) - Illumination for Panel Switch does not Come on with Tail Switch ON


INSPECTION PROCEDURE

1.CHECK VEHICLE SIGNAL (OPERATION CHECK)
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (LandCruiser RM000003SKF0LFX.html)]

  1. Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch
    		Display
    Tail or head
    		ON
    Off
    		OFF
    HINT:
    This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

  1. Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the light control switch operation.

    OK:
    Light Control Switch
    		Display
    Tail or head
    		DIM
    Off
    		BRIGHT


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (LandCruiser RM000005MAG00FX.html)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (LandCruiser RM000003AHY02NX.html)