Dtc B1585 Usb Device Malfunction


DESCRIPTION

INSPECTION PROCEDURE

REPLACE USB DEVICE OR “iPod”

CHECK FOR DTC

DTC B1585 USB Device Malfunction


DESCRIPTION

This DTC is stored when a malfunction occurs in a connected device.

DTC Code
DTC Detection Condition
Trouble Area
B1585
USB Device Malfunction
  1. Non mass-storage class or incompatible protocol USB device
  2. USB device with an incompatible file system, corrupted or incompatible File Allocation Table (FAT)
  3. "iPod" malfunction
  4. "iPod" with unsupported firmware
  5. Unsupported "iPod" model
  1. USB device or "iPod"
  2. Navigation ECU

INSPECTION PROCEDURE

1.REPLACE USB DEVICE OR “iPod”

  1. Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

  1. Turn the engine switch off.

    HINT:
    When this DTC has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.

  1. Turn the engine switch on (ACC).

  1. Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

    HINT:
    1. If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
    2. Refer to System Description for compatible formats and versions (LandCruiser RM000005K8W00WX.html).

NEXT


2.CHECK FOR DTC

  1. Clear the DTCs (LandCruiser RM0000011BU0W8X.html).

  1. Check for DTCs (LandCruiser RM0000011BU0W8X.html).

    OK:
    No DTCs are output.


NG
REPLACE NAVIGATION ECU (LandCruiser RM000004OAH00PX.html)
OK

USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR USB DEVICE OR "iPod" WAS DEFECTIVE