Rear Door Speaker Inspection


  1. INSPECT REAR SPEAKER SET

  2. INSPECT REAR NO. 2 SPEAKER ASSEMBLY

Rear Door Speaker -- Inspection



1. INSPECT REAR SPEAKER SET


  1. for JBL Made:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Door Speaker Inspection

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      1 - 2
      		Always
      		1.8 to 2.6 Ω
      If the result is not as specified, replace the rear speaker set.
      Text in Illustration
      *a
      		Component without harness connected
      (Rear Speaker Set)


  1. except JBL Made:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Door Speaker Inspection

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      1 - 2
      		Always
      		4 Ω
      If the result is not as specified, replace the rear speaker set.
      Text in Illustration
      *a
      		Component without harness connected
      (Rear Speaker Set)


2. INSPECT REAR NO. 2 SPEAKER ASSEMBLY

  1. for JBL Made:
    When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

    OK:
    Malfunction disappears.
    HINT:
    1. Connect the connectors to the rear No. 2 speakers.
    2. When there is a possibility that either the right or left rear No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.
    3. Perform the inspection above on both the LH and RH sides.