Luggage Speaker (For 3 Door) Removal
REMOVE REAR NO. 1 SEAT ASSEMBLY
REMOVE DOOR SCUFF PLATE ASSEMBLY LH
REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
REMOVE MAT SET PLATE COVER
REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
REMOVE QUARTER TRIM COVER HOLE LH
REMOVE REAR FLOOR CARPET ASSEMBLY
REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)
REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)
REMOVE QUARTER TRIM POCKET TRAY
REMOVE OUTER LAP BELT ANCHOR COVER
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH
REMOVE REAR HEADER SPEAKER ASSEMBLY
REMOVE DOOR SCUFF PLATE ASSEMBLY RH
REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
REMOVE QUARTER TRIM COVER HOLE RH
REMOVE OUTER LAP BELT ANCHOR COVER
REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
REMOVE NO. 1 SPEAKER WITH BOX ASSEMBLY
Luggage Speaker (For 3 Door) -- Removal |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
1. REMOVE REAR NO. 1 SEAT ASSEMBLY |
for 60/40 Split Tumble Seat Type LH Side:
(LandCruiser RM0000046ZI006X.html)
for 60/40 Split Tumble Seat Type RH Side:
(LandCruiser RM0000046ZN006X.html)
2. REMOVE DOOR SCUFF PLATE ASSEMBLY LH |
Put protective tape around the door scuff plate.
Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective Tape
|
3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
Remove the front door opening trim weatherstrip.
4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
Remove the tonneau cover.
5. REMOVE MAT SET PLATE COVER |
- HINT:
- Use the same procedure for all mat set plate covers.
Using a screwdriver, detach the 2 claws and remove the mat set plate cover.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective tape
|
6. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE |
Remove the 5 screws.
Detach the 6 claws and remove the rear floor mat rear support plate.
7. REMOVE QUARTER TRIM COVER HOLE LH |
Detach the 2 claws and 2 guides and remove the quarter trim cover hole.
8. REMOVE REAR FLOOR CARPET ASSEMBLY |
Remove the rear floor carpet.
9. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
- HINT:
- Use the same procedure for the other No. 1 luggage compartment trim hook.
Remove the luggage compartment trim hook by turning it clockwise.
10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover) |
- HINT:
- Use the same procedure for the other tonneau cover holder cap.
Using a screwdriver, detach the 2 claws and remove the tonneau cover holder cap.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective tape
|
11. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover) |
- HINT:
- Use the same procedure for the other front deck side trim cover.
Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective tape
|
12. REMOVE QUARTER TRIM POCKET TRAY |
Put protective tape around the quarter trim pocket tray.
Using a screwdriver, detach the 6 claws and 2 guides, and remove the quarter trim pocket tray.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective tape
|
13. REMOVE OUTER LAP BELT ANCHOR COVER |
- HINT:
- Use the same procedure for the other outer lap belt anchor cover.
Detach the 3 claws and remove the outer lap belt anchor cover.
14. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH |
Remove the bolt and disconnect the front seat outer belt floor anchor.
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Remove the 3 bolts and 2 screws.
Detach the 9 claws and 12 clips and remove the deck trim side panel.
15. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH |
Detach the 7 clips.
Detach the 4 claws and 2 guides, pass the rear No. 1 seat belt floor anchor through the rear quarter trim panel and remove the rear quarter trim panel.
16. REMOVE REAR HEADER SPEAKER ASSEMBLY |
Disconnect the connector.
Remove the 2 bolts and rear header speaker assembly.
17. REMOVE DOOR SCUFF PLATE ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
18. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
- HINT:
- Use the same procedure described for the LH side.
19. REMOVE QUARTER TRIM COVER HOLE RH |
- HINT:
- Use the same procedure described for the LH side.
20. REMOVE OUTER LAP BELT ANCHOR COVER |
- HINT:
- Use the same procedure for the other outer lap belt anchor cover.
Detach the 3 claws and remove the outer lap belt anchor cover.
21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH |
Remove the bolt and disconnect the front seat outer belt floor anchor.
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Remove the 3 bolts and 2 screws.
Detach the 9 claws and 12 clips.
Disconnect the connector and remove the deck trim side panel.
22. REMOVE NO. 1 SPEAKER WITH BOX ASSEMBLY |
Disconnect the connector.
Remove the 4 bolts and No. 1 speaker with box assembly.