Radio Receiver (For Radio Receiver Type) -- Installation |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. INSTALL NO. 1 RADIO BRACKET |
Install the No. 1 radio bracket with the 3 screws.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
| 2. INSTALL NO. 2 RADIO BRACKET |
Install the No. 2 radio bracket with the 3 screws.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
| 3. INSTALL RADIO RECEIVER ASSEMBLY |
Connect each connector.
Insert the radio receiver assembly to attach the 2 guides on its backside.
- NOTICE:
- When inserting the receiver, do not press the knobs on it.
 |
Install the radio receiver assembly with the 4 bolts.
- Torque:
- 13 N*m{133 kgf*cm, 10 ft.*lbf}
| 4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
Attach the 10 clips to install the instrument cluster finish panel assembly.
 |
| 5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
Connect the connector.
Attach the 4 clips to install the integration control and panel assembly.