Rear Seat Entertainment System Television Display Power Source Circuit


DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - BATTERY AND BODY GROUND)

REAR SEAT ENTERTAINMENT SYSTEM - Television Display Power Source Circuit


DESCRIPTION

This is power source circuit of the television display assembly.

WIRING DIAGRAM


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Seat Entertainment System Television Display Power Source Circuit


INSPECTION PROCEDURE

NOTICE:
Inspect the fuses and relays for circuits related to this system before performing the following inspection procedure.
1.CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - BATTERY AND BODY GROUND)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Seat Entertainment System Television Display Power Source Circuit

  1. Disconnect the television display assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    W14-17 (GND) - Body ground
    		Always
    		Below 1 Ω

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Condition
    		Specified Condition
    W14-1 (+B) - Body ground
    		Always
    		11 to 14 V
    W14-2 (ACC) - Body ground
    		Ignition switch ACC
    		11 to 14 V
Text in Illustration
*a
Front view of wire harness connector
(to Television Display Assembly)


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (LandCruiser RM0000033VP01OX.html)