Audio And Visual System (For Radio And Display Type) Disc Cannot Be Inserted Or Is Ejected Right After Insertion

INSPECTION PROCEDURE

CHECK IF A PROPER DISC IS INSERTED

CHECK THAT DISC IS INSERTED PROPERLY

CLEAN DISC AND RECHECK

REPLACE DISC AND RECHECK

INSPECTION PROCEDURE

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).

1. Make sure that the CD is an audio disc or a disc with MP3, WMA or ACC files, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
   

   OK:

   Disc is normal.
   

   HINT:

   1. Translucent or uniquely-shaped CDs cannot be played.
      
   2. CDs and DVDs with adhesive paper labels should not be played.
      
   3. Commercial audio CDs and DVDs can be played.
      
   4. CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
      
   5. MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.
      
   6. For details on playable CDs and DVDs, refer to the Owner's Manual.
      

1. Check whether or not the disc is inserted upside down.
   

   OK:

   The disc is properly inserted.
   

1. Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.
   

   OK:

   Malfunction disappears.
   

   NOTICE:

   Do not use a conventional record cleaner or anti-static preservative.

1. Replace the disc with a known good one and check that the malfunction disappears.
   

   OK:

   The malfunction disappears.