Power Tilt And Power Telescopic Steering Column System Freeze Frame Data

  1. FREEZE FRAME DATA

Power Tilt And Power Telescopic Steering Column System -- Freeze Frame Data



FREEZE FRAME DATA

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and check the freeze frame data by following the prompts on the intelligent tester screen.

    Tilt & Telescopic
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Tilt Position
    		Current tilt position data/min.: 0, max.: 65535
    		28672 to 36864
    		-
    Telesco Position
    		Current telescopic position data/min.: 0, max.: 65535
    		28672 to 36864
    		-
    Tilt Return Position
    		Memorized tilt return position data/min.: 0, max.: 65535
    		28672 to 36864
    		-
    Telesco Return Position
    		Memorized telescopic return position data/min.: 0, max.: 65535
    		28672 to 36864
    		-
    Tilt Up Switch
    		Input state of tilt up by manual switch/ON or OFF
    		ON: Tilt up activated by manual switch
    OFF: Tilt up not activated by manual switch
    		-
    Tilt Up SW(CAN)
    		Input state of tilt up by manual switch/ON or OFF
    		ON: Tilt up activated by manual switch
    OFF: Tilt up not activated by manual switch
    		-
    Tilt Down Switch
    		Input state of tilt down by manual switch/ON or OFF
    		ON: Tilt down activated by manual switch
    OFF: Tilt down not activated by manual switch
    		-
    Tilt Down SW(CAN)
    		Input state of tilt down by manual switch/ON or OFF
    		ON: Tilt down activated by manual switch
    OFF: Tilt down not activated by manual switch
    		-
    Telesco Short Switch
    		Input state of telescopic short by manual switch/ON or OFF
    		ON: Telescopic short activated by manual switch
    OFF: Telescopic short not activated by manual switch
    		-
    Telesco Short SW(CAN)
    		Input state of telescopic short by manual switch/ON or OFF
    		ON: Telescopic short activated by manual switch
    OFF: Telescopic short not activated by manual switch
    		-
    Telesco Long Switch
    		Input state of telescopic long by manual switch/ON or OFF
    		ON: Telescopic long activated by manual switch
    OFF: Telescopic long not activated by manual switch
    		-
    Telesco Long SW(CAN)
    		Input state of telescopic long by manual switch/ON or OFF
    		ON: Telescopic long activated by manual switch
    OFF: Telescopic long not activated by manual switch
    		-
    T&T Manual SW Data
    		Voltage data of manual switch/min.: 0.00 V, max.: 4.99 V
    		Neutral position: Below 0.2 V
    Tilt up: 1.67 to 2.13 V
    Tilt down: 0.54 to 0.74 V
    Telescopic contract: 1.08 to 1.40 V
    Telescopic extend: 2.22 to 2.77 V
    		-
    Power Source Voltage
    		Voltage data of power supply/min.: 0.00 V, max.: 19.99 V
    		11 to 14 V
    		-
    Freeze Speed Info
    		Vehicle speed data/min.: 0 km/h (0 mph), max.: 255 km/h (158 mph)
    		Actual vehicle speed
    		-
    IG Switch (CAN)
    		Communication state of engine switch/ON or OFF
    		ON: Communication normal
    OFF: Communication interrupted
    		-
    IG Switch
    		Input state of engine switch/ON or OFF
    		ON: Input signal normal
    OFF: Input signal interrupted
    		-
    Receive from Meter
    		Communication state of combination meter signal/OK or Interpt
    		OK: Communication normal
    Interpt: Communication interrupted
    		-
    Receive from Seat ECU
    		Communication state of position control ECU signal/OK or Interpt
    		OK: Communication normal
    Interpt: Communication interrupted
    		-
    Receive from Combi
    		Communication state of combination switch ECU signal/OK or Interpt
    		OK: Communication normal
    Interpt: Communication interrupted
    		-
    J/B
    		Communication state of main body ECU signal/OK or Interpt
    		OK: Communication normal
    Interpt: Communication interrupted
    		-
    Handle Position
    		Steering wheel position signal/Away or Return
    		Away: Steering wheel in away position
    Return: Steering wheel in return position
    (Except remote start)
    		-
    The Number of DTCs
    		Number of stored diagnostic trouble codes/min.: 0, max.: 255
    		Actual number of stored diagnostic trouble codes
    		-