Power Tilt And Power Telescopic Steering Column System How To Proceed With Troubleshooting

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK CAN COMMUNICATION SYSTEM*

  4. CHECK FOR DTC*

  5. PROBLEM SYMPTOMS TABLE

  6. OVERALL ANALYSIS AND TROUBLESHOOTING*

  7. REPAIR

  8. CONFIRMATION TEST

Power Tilt And Power Telescopic Steering Column System -- How To Proceed With Troubleshooting


HINT:
*: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK CAN COMMUNICATION SYSTEM*

    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      Result
      Result
      		Proceed to
      CAN DTC is not output
      		A
      CAN DTC is output
      		for LHD with Entry and Start System
      		B
      for RHD with Entry and Start System
      		C



    		B.
    GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (LandCruiser RM000001RSO0C5X.html)

    		C.
    GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (LandCruiser RM000001RSO0BZX.html)
    A


    4.CHECK FOR DTC*

    1. Check for DTCs (LandCruiser RM000000XZH069X.html).

    2. Clear the DTC(s) (LandCruiser RM000000XZH069X.html).

    3. Recheck for DTCs (LandCruiser RM000000XZH069X.html).

      Result
      Result
      		Proceed to
      DTC is not output
      		A
      DTC is output
      		B



    		B.
    GO TO DIAGNOSTIC TROUBLE CODE CHART (LandCruiser RM000000XZ3079X.html)
    A


    5.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (LandCruiser RM000000XZ606ZX.html).

      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B



    		B.
    Go to step 7
    A


    6.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Terminals of ECU (LandCruiser RM000000XZ505IX.html).

    2. Data List / Active Test (LandCruiser RM000000XZJ05FX.html).


    NEXT


    7.REPAIR

      NEXT


      8.CONFIRMATION TEST

        NEXT

        END