Rear Brake Flexible Hose -- Removal |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE REAR WHEEL |
| 2. DRAIN BRAKE FLUID |
- NOTICE:
- Wash off brake fluid immediately if it comes in contact with any painted surface.
| 3. REMOVE REAR FLEXIBLE HOSE LH |
Remove the union bolt, gasket and rear flexible hose from the rear disc brake cylinder.
 |
Disconnect the brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
- NOTICE:
- Do not bend or damage the brake tube.
- Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.
 |
Remove the clip.
| 4. REMOVE REAR FLEXIBLE HOSE |
Disconnect each brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
 |
Remove the 2 clips.
Remove the rear flexible hose.
Disconnect each brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
 |
Remove the 2 clips.
Remove the rear flexible hose.
| 5. REMOVE NO. 5 FLEXIBLE HOSE BRACKET |
for 3 Door:
Remove the bolt and bracket from the upper arm bracket.
for 5 Door:
Remove the bolt and bracket from the upper arm bracket.
| 6. REMOVE NO. 6 FLEXIBLE HOSE BRACKET |
Remove the bolt and bracket from the rear axle housing.