Rear Brake Reassembly

Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new piston seal.

Install the piston seal to the rear disc brake cylinder.

Apply a light coat of lithium soap base glycol grease to the entire inner circumference of a new cylinder boot.

Apply a light coat of lithium soap base glycol grease to the entire outer circumference of the rear disc brake piston where it contacts the rear disc brake cylinder.

Install the cylinder boot to the rear disc brake piston.

Install the rear disc brake piston to the rear disc brake cylinder.

NOTICE:

Do not forcibly install the piston into the disc brake cylinder.

Install the cylinder boot to the rear disc brake cylinder.

NOTICE:

Install the boot securely into the grooves of the disc brake cylinder.

Push in the rear disc brake piston by hand and install the cylinder boot into the groove of the rear disc brake piston.

NOTICE:

Install the boot securely into the grooves of the piston.

Temporarily install the rear disc brake bleeder plug to the rear disc brake cylinder.

HINT:

The bleeder plug will be tightened to the torque specification in the "Bleed Brake Line" procedure.