Vacuum Pump (For 5L-E) Installation


  1. INSTALL VACUUM PUMP ASSEMBLY

  2. INSTALL GENERATOR WITH VACUUM PUMP ASSEMBLY

  3. CHECK VACUUM PUMP ASSEMBLY

Vacuum Pump (For 5L-E) -- Installation



1. INSTALL VACUUM PUMP ASSEMBLY

  1. Align the matchmarks and install the vacuum pump to the generator with the 4 bolts.

    Torque:
    7.8 N*m{80 kgf*cm, 69 in.*lbf}


2. INSTALL GENERATOR WITH VACUUM PUMP ASSEMBLY
HINT:
Refer to the instructions for installation of the generator with vacuum pump (LandCruiser RM0000014PF05CX.html).


3. CHECK VACUUM PUMP ASSEMBLY

  1. Disconnect the vacuum hose from the vacuum pump.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Brake System (Other).Brake System.Vacuum Pump (For 5L-E) Installation

  1. Connect the hose of a vacuum gauge to the pump.

    Text in Illustration
    *1
    		Vacuum Gauge
    *2
    		Plug

  1. Insert a plug into the other hose of the gauge.

  1. Start the engine and warm it up for more than 2 minutes.

  1. With the engine idling, measure the negative pressure of the pump.

    Standard negative pressure:
    More than 86.7 kPa (650 mmHg, 26 in.Hg)

  1. Remove the gauge from the pump.

  1. Connect the hose to the pump with the clip.