Skid Control Buzzer Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

  3. REMOVE SKID CONTROL BUZZER ASSEMBLY

Skid Control Buzzer -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(LandCruiser RM0000046J800OX.html)


3. REMOVE SKID CONTROL BUZZER ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Brake Control Dynamic Control Systems.Anti-Lock Brake System.Skid Control Buzzer Removal

  1. Detach the clamp and remove the buzzer.

    Text in Illustration
    *A
    		for LHD
    *B
    		for RHD

  1. Disconnect the connector.