Dtc C1440 Steering Angle Sensor Unusual Bank Angle Detected


DESCRIPTION

INSPECTION PROCEDURE

CHECK DTC

CLEAR DTC

DTC C1440 Steering Angle Sensor Unusual Bank Angle Detected


DESCRIPTION

If the skid control ECU determines that the vehicle is being driven at a steep bank angle, the skid control ECU stores DTC C1440 while VSC operation is temporarily disabled.
It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes, which automatically clears DTC C1440, after the vehicle is returned to a normal position.
HINT:
DTC C1440 and the yaw rate and acceleration sensor DTC are stored when the skid control ECU determines that the vehicle is being driven at a steep bank angle and either of the following conditions is met:
  1. The yaw rate and acceleration sensor is installed at an angle.
  2. The yaw rate and acceleration sensor signal output is stuck.

DTC Code
DTC Detection Condition
Trouble Area
C1440
Driving at a steep bank angle
Yaw rate and acceleration sensor

INSPECTION PROCEDURE

1.CHECK DTC
  1. Clear the DTCs (LandCruiser RM0000046KV016X.html).

  1. Perform a road test.

  1. Check if the same DTC is output (LandCruiser RM0000046KV016X.html).

    Result
    Result
    Proceed to
    DTC C1440 is output
    A
    DTC C1440 is not output
    B
    Yaw rate and acceleration sensor DTC is output
    C



B
END

C
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (LandCruiser RM0000045Z601DX.html)
A


2.CLEAR DTC
  1. Clear the DTC (LandCruiser RM0000046KV016X.html).

    HINT:
    1. If the skid control ECU determines that the vehicle is being driven at a steep bank angle, the skid control ECU stores DTC C1440 while VSC operation is temporarily disabled.
    2. It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes, which automatically clears DTC C1440, after the vehicle is returned to a normal position.

NEXT

END