Dtc C1411 Rear Speed Sensor Rh Performance
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
REPLACE REAR SPEED SENSOR
DTC C1411 Rear Speed Sensor RH Performance |
DTC C1412 Rear Speed Sensor LH Performance |
DESCRIPTION
Refer to DTCs C1401 and C1402 (LandCruiser RM000000XI910GX_01.html).DTC Code
| DTC Detection Condition
| Trouble Area
|
C1411 C1412
| One of the following conditions is met:
- When the vehicle is driven in reverse at a speed of 3 km/h (1.8 mph) or more and 3 of the wheel sensors detect the reverse signal, the other sensor detects a high frequency pulse 75 times while the ignition switch is ON.
- At a vehicle speed of 10 km/h (6 mph) or more, the vehicle speed sensor output drops by 50% for 5 seconds.
- The lowest wheel speed is 10 km/h (6 mph) or more and the difference between the highest and lowest wheel speed values is 2 km/h (1 mph) or less for 15 seconds.
- At a vehicle speed of 30 km/h (18 mph) or more, one wheel direction is different from the other 3 wheels for 1 second.
- At a vehicle speed of 100 km/h (60 mph), a reverse signal is output for 1 second or more.
- At a vehicle speed of 30 km/h (18 mph) or more, the rotation direction of the one of the wheels is not detected normally and the rotation direction of the other 3 wheels is not the same for 1 second.
| Rear speed sensor RH/LH
|
- HINT:
- DTC C1411 is for the rear speed sensor RH.
- DTC C1412 is for the rear speed sensor LH.
WIRING DIAGRAM
Refer to DTCs C1407 and C1408 (LandCruiser RM00000369308RX_02.html).
INSPECTION PROCEDURE
- NOTICE:
- Check the speed sensor signal after replacement (LandCruiser RM000000XHT0EOX.html).
1.REPLACE REAR SPEED SENSOR |
Replace the rear speed sensor (LandCruiser RM000001B2G023X.html).