Dtc C2176/76 Receiver Error
DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC OUTPUT (C2176/76)
DTC C2176/76 Receiver Error |
DESCRIPTION
The signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.DTC No.
| DTC Detection Condition
| Trouble Area
|
C2176/76
| Malfunction in the tire pressure warning ECU and receiver internal circuit
| Tire pressure warning ECU and receiver
|
INSPECTION PROCEDURE
- NOTICE:
- When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.
- It is necessary to perform initialization (LandCruiser RM000000XMZ0AOX.html) after registration (LandCruiser RM000000XN10DCX.html) of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.
| 1.CHECK DTC OUTPUT (C2176/76) |
Clear the DTCs (LandCruiser RM000000XMX0CSX.html).
Turn the ignition switch off.
Turn the ignition switch ON.
Check for DTCs (LandCruiser RM000000XMX0CSX.html).
- OK:
- DTC C2176/76 is not output.