Rear Stabilizer Bar (W/O Kdss) Installation

Install the 2 stabilizer bushes to the stabilizer bar.

HINT:

Install the stabilizer bush to the outer side of the stabilizer bush stopper on the stabilizer bar.

Text in Illustration

Outer Side

Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

Torque:

45 N*m{459 kgf*cm, 33 ft.*lbf}

Install the stabilizer link with a new nut.

Torque:

70 N*m{714 kgf*cm, 52 ft.*lbf}

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

Install the 2 retainers and cushion to the stabilizer link.

Hold the stabilizer bar link with a wrench, and then install the retainer, cushion and link with a new nut.

Torque:

15 N*m{153 kgf*cm, 11 ft.*lbf}