Front Upper Suspension Arm Disassembly


  1. REMOVE FRONT SUSPENSION UPPER ARM BUSH LH

  2. REMOVE FRONT UPPER BALL JOINT DUST COVER LH

Front Upper Suspension Arm -- Disassembly



1. REMOVE FRONT SUSPENSION UPPER ARM BUSH LH
HINT:
Use the same procedure for the front and rear sides.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Front Suspension.Front Suspension System.Front Upper Suspension Arm Disassembly

  1. Using SST and a press, press out the bush.

    SST
    09613-26010
    09710-22021(09710-01031)
    09950-00020


2. REMOVE FRONT UPPER BALL JOINT DUST COVER LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a snap ring expander, remove the dust cover set ring and dust cover from the upper arm.

    NOTICE:
    1. Do not damage the ball joint dust cover.
    2. If the ball joint dust cover is damaged, replace it.