Front Acceleration Sensor Inspection

Connect 3 dry batteries of 1.5 V in series.

Connect the positive (+) end of the batteries to terminal 3 (SBR) of the acceleration sensor and the negative (-) end of the batteries to terminal 2 (SGR). Then measure the voltage between terminal 1 (SGFR) and terminal 2 (SGR).

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Sensor Condition	Specified Condition
1 (SGFR) - 2 (SGR)	Sensor stationary	Approx. 2.0 to 2.5 V
	Sensor tilted	Changes between approx. 0.9 and 2.3 V

Text in Illustration

*a	Component without harness connected (Front Acceleration Sensor)
	Top
	Bottom

HINT:

When the front acceleration sensor is tilted, it may output a different value.

NOTICE:

1. Do not apply higher than 6 V.
   
2. Do not drop the front acceleration sensor. If it is dropped, replace it with a new one.
   
3. Never place the front acceleration sensor upside down.