Stabilizer Control Ecu Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

  3. REMOVE STABILIZER CONTROL ECU

Stabilizer Control Ecu -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
(LandCruiser RM000003YPV037X.html)


3. REMOVE STABILIZER CONTROL ECU


  1. Disconnect the connector.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Suspension Control.Air Suspension System.Stabilizer Control Ecu Removal


    Text in Illustration
    *A
    		for LHD
    		*B
    		for RHD

  1. Remove the bolt and stabilizer control ECU.

    NOTICE:
    1. Avoid any impact to the stabilizer control ECU.
    2. Replace the stabilizer control ECU with a new one if it is dropped.