Rear Differential Lock Control Switch (W/ Combination Switch) -- Installation |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. INSTALL CENTER CLUSTER MODULE PANEL |
Install the center cluster module panel to the center cluster module switch (rear differential lock control switch) with the 4 screws.
| 2. INSTALL CENTER CLUSTER MODULE SWITCH (REAR DIFFERENTIAL LOCK CONTROL SWITCH) |
Connect the connector.
Attach the 3 clips and install the center cluster module switch (rear differential lock control switch) with the 2 bolts.
| 3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH |
w/o Seat Heater System:
Connect the connector.
Attach the 5 clips to install the front console upper panel garnish.
w/o CRAWL:
Connect each connector.
Attach the 5 clips to install the front console upper panel garnish.
w/ CRAWL:
Attach the 5 clips to install the front console upper panel garnish.
| 4. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
- HINT:
- Use the same procedure described for the No. 2 instrument panel finish panel cushion.
| 5. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.
| 6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
Attach the 4 clips to install the instrument panel finish panel end LH.
| 7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH |
Attach the 4 clips to install the instrument panel finish panel end RH.
| 8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
Connect the connector.
Attach the 4 clips to install the integration control and panel assembly.