Transfer Oil On-Vehicle Inspection


  1. CHECK TRANSFER OIL

  2. ADD TRANSFER OIL

Transfer Oil -- On-Vehicle Inspection



1. CHECK TRANSFER OIL


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the filler plug and gasket.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Vf4Bm Transfer 4Wd Awd.Transfer System.Transfer Oil On-Vehicle Inspection

  1. Check that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.
    If the result is not as specified, add transfer oil.

    Text in Illustration
    *a
    		0 to 5 mm
    NOTICE:
    Too much or too little oil will lead to transfer problems.

  1. When the oil level is too low, check for oil leaks.

  1. Install a new gasket to the filler plug and then tighten the plug.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}


2. ADD TRANSFER OIL

  1. Remove the filler plug and gasket.

  1. Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

    NOTICE:
    1. Add oil slowly.
    2. Add oil a little at a time, waiting several minutes between each addition of oil.

  1. Wait approximately 5 minutes and check that the oil level has not changed.

  1. Install a new gasket to the filler plug and then tighten the plug.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}