Oil Pump Reassembly

Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

SST

09350-30020(09351-32140)

Standard depth:

-0.3 to 0.3 mm (-0.0118 to 0.0118 in.)

Coat the lip of the front oil pump oil seal with MP grease.

Place the front oil pump body sub-assembly on the torque converter assembly.

Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly.

Coat the front oil pump drive gear with ATF and install it to the front oil pump body sub-assembly.

Align the bolt holes of the stator shaft assembly with the bolt holes of the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.

Using a T30 "TORX" socket wrench, install the 7 screws.

Torque:

11 N*m{110 kgf*cm, 8 ft.*lbf}

Using a T30 "TORX" socket wrench, install the front oil pump plate with the 3 screws.

Torque:

11 N*m{110 kgf*cm, 8 ft.*lbf}

Install the oil pump assembly to the torque converter assembly.

Check that the front oil pump drive gear rotates smoothly.

Remove the oil pump assembly from the torque converter assembly.

Coat 2 new clutch drum oil seal rings with ATF and install them to the oil pump assembly

NOTICE:

1. Do not expand the gap of the clutch drum oil seal rings excessively.
   
2. After installing the clutch drum oil seal rings, check that they rotate smoothly.
   

Coat a new front oil pump body O-ring with ATF and install it to the oil pump assembly.