Transmission Wire Inspection
INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)
Transmission Wire -- Inspection |
| 1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR) |
Measure the resistance according to the value(s) in the table below.
- HINT:
- If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.
- Standard Resistance:
Tester Connection
| ATF Temperature
| Specified Condition
|
2 (OT-) - 10 (OT+)
| Always
| 79 Ω to 156 kΩ
|
2 (OT-) - Body ground
| Always
| 10 kΩ or higher
|
10 (OT+) - Body ground
| Always
| 10 kΩ or higher
|
1 (OT2-) - 9 (OT2+)
| Always
| 25 Ω to 156 kΩ
|
1 (OT2-) - Body ground
| Always
| 10 kΩ or higher
|
9 (OT2+) - Body ground
| Always
| 10 kΩ or higher
|
Text in Illustration*a
| Component without harness connected:
(Transmission Wire)
|
If the result is not as specified, replace the transmission wire.
