Ignition Switch Removal


  1. REMOVE LOWER STEERING COLUMN COVER

  2. REMOVE IGNITION SWITCH ASSEMBLY

Ignition Switch -- Removal


HINT:
  1. Use the same procedure for LHD and RHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE LOWER STEERING COLUMN COVER

  1. Remove the 2 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to remove the 2 screws.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and remove the lower steering column cover.



2. REMOVE IGNITION SWITCH ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the ignition switch connector and detach the wire harness clamp.

  1. Remove the 2 screws and ignition switch.