Glow Plug Installation

Using a 12 mm deep socket wrench, install the 4 glow plugs.

Torque:

13 N*m{130 kgf*cm, 10 ft.*lbf}

Install the No. 1 glow plug resistor insulator and No. 1 glow plug connector.

Install the glow plug connector with the 4 nuts. Uniformly tighten the nuts.

Torque:

1.0 N*m{10 kgf*cm, 9 in.*lbf}

Install the 4 screw grommets.

Connect the engine wire and install the No. 2 glow plug resistor insulator and washer with the bolt.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Connect the ventilation hose.

Install the intake pipe with the 2 bolts and tighten the hose clamp.

Torque:

for bolt:

18 N*m{184 kgf*cm, 13 ft.*lbf}

for clamp:

6.0 N*m{61 kgf*cm, 53 in.*lbf}

Insert the hinge part of the air cleaner cap and hose into the air cleaner case, and then attach the 4 hook clamps.

Connect the air cleaner cap sub-assembly with the clamp.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Attach the wire harness clamp.

Connect the 2 clamps and connector.