Starter (For 2.7 Kw Type) Removal


  1. DISCONNECT PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

  4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

  5. REMOVE TRANSMISSION ASSEMBLY (w/ Urea SCR System)

  6. REMOVE STARTER ASSEMBLY

Starter (For 2.7 Kw Type) -- Removal



1. DISCONNECT PRECAUTION
NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


3. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

  1. Remove the 5 clips and front No. 1 fender apron to frame seal LH.



4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
(LandCruiser RM0000016WV02UX.html)


5. REMOVE TRANSMISSION ASSEMBLY (w/ Urea SCR System)

  1. for Manual Transmission:
    (LandCruiser RM00000178S015X.html)

  1. for Automatic Transmission:
    (LandCruiser RM0000013F601RX.html)



6. REMOVE STARTER ASSEMBLY

  1. w/ Urea SCR System:

    1. Remove the starter assembly.



  1. w/o Urea SCR System:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Open the terminal cap.

    2. Remove the nut and disconnect the starter wire.

    3. Disconnect the starter connector.



      4. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    4. for Automatic Transmission:
      Remove the bolt, 2 nuts and starter assembly.



      5. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    5. for Manual Transmission:
      w/o Urea SCR System:
      Remove the 4 bolts, 3 nuts, clip, and then disconnect the clutch release cylinder assembly.



      6. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    6. for Manual Transmission:
      Remove the bolt, nut and starter assembly.