Starter (For 3.0 Kw Type) Installation


  1. INSTALL STARTER ASSEMBLY

  2. INSTALL REAR ENGINE UNDER COVER ASSEMBLY

  3. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter (For 3.0 Kw Type) -- Installation



1. INSTALL STARTER ASSEMBLY

  1. Install the starter assembly with the bolt and 2 nuts.

    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}

  1. Connect the starter wire with the nut.

    Torque:
    21 N*m{215 kgf*cm, 16 ft.*lbf}

  1. Connect the starter connector.

  1. Install the terminal cap.



2. INSTALL REAR ENGINE UNDER COVER ASSEMBLY

  1. Install the rear engine under cover with the 4 bolts.

    Torque:
    29 N*m{296 kgf*cm, 21 ft.*lbf}


3. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

  1. Install the frame seal with the 5 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).