Engine Oil Cooler -- Removal |
| 1. REMOVE GENERATOR ASSEMBLY |
Remove the generator (LandCruiser RM0000013XW052X_01_0004.html).
| 2. REMOVE EXHAUST MANIFOLD |
Remove the exhaust manifold (LandCruiser RM000004564005X.html).
| 3. DRAIN ENGINE COOLANT |
- CAUTION:
- Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
Loosen the radiator drain cock plug.
Text in Illustration *1 Radiator Cap *2 Radiator Reservoir *3 Radiator Drain Cock Plug *4 Cylinder Block Drain Cock Plug - HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.
Drain the coolant by removing the radiator cap.
Loosen the cylinder block drain cock plug.
Loosen the cylinder block drain cock plug and drain the coolant from the engine.
- NOTICE:
- If coolant is not drained from the radiator drain cock plug, cylinder block drain cock plugs and radiator reservoir, clogging in the radiator or coolant leakage from the seal of the water pump may result.
| 4. DRAIN ENGINE OIL |
Remove the oil filler cap.
Remove the oil drain plug and gasket, and then drain the oil into a container.
Clean the drain plug and install it with a new gasket.
- Torque:
- 35 N*m{352 kgf*cm, 25 ft.*lbf}
| 5. DISCONNECT OIL FILTER SUB-ASSEMBLY |
Using SST, remove the oil filter.
- SST
- 09228-44011
 |
| 6. DISCONNECT VACUUM PUMP OIL INLET HOSE |
Remove the union bolt and gasket, and then disconnect the vacuum pump oil inlet hose from the cylinder block.
 |
| 7. REMOVE OIL FILTER BRACKET SUB-ASSEMBLY |
Remove the 10 bolts, 2 nuts, oil filter bracket and gasket.
 |
| 8. REMOVE OIL COOLER ASSEMBLY |
Remove the 4 nuts, oil cooler and 2 gaskets.